Charging Voltage Adjustment - Sony HVL-F56AM Service Manual

5-3.

CHARGING VOLTAGE ADJUSTMENT

Note:
If dialog box of error code appears during the adjustment, check the reason of error referring to page 5-20.
Equipment
• Personal Computer (PC)
• Camera DSLR-A100
• USB Cord With Connector
• Flash Adjustment Program
Note:
Flash Adjustment Program is downloadable from the ESI homepage.
• DC Power Supply
• Digital Multimeter
• Power Supply Adaptor
1. Preparations
1) Set the equipments as shown in the Fig. 5-3-1.
Note:
For connection method of power supply adaptor, refer to page 5-2.
Set the detection pin of the digital multimeter to the DC voltage detecting point.
(The probe (-) of the digital multimeter can be connected to the negative line of the DC power supply.)
DC power supply
(5.8 V, 1.8 A)
2) Set the voltage and current of the DC power supply to "5.8V, 1.8A".
3) Start the flash adjustment program "FlashAdjustment.exe" referring to "5-1-3. Flash Adjustment Program".
Fig. 5-3-2
HVL-F56AM
The probe (-) of the digital multimeter can be connected
to the negative line of the DC power supply.
Ensure the bounce angle is 0 degree (locked position).
Camera
Power supply adaptor
Fig. 5-3-1
Digital multimeter
USB cord with connector
5-6
Personal Computer