Sony HVL-F56AM Service Manual page 21

5-1-3. Flash Adjustment Program
The flash adjustment program is required for the check/adjustment after the service repair.
Prepare/start the flash adjustment program with the following steps.
Equipment
• Personal Computer (PC)
• Camera DSLR-A100
• USB Cord With Connector
• Flash Adjustment Program
Note:
Flash Adjustment Program is downloadable from the ESI homepage.
1. Installation of the Flash Adjustment Program
For installation of the flash adjustment program, refer to the link "• Preparing the DSLR-A100 adjustment program" described on
the top cover of the camera DSLR-A100 service manual "9-852-130-51".
2. Start the Flash Adjustment Program
1) Connect the flash to the camera.
2) Turn the POWER switch of the camera to OFF, then connect the camera and PC with the USB cord with connector.
3) Set the mode dial of camera to "M".
4) Turn the POWER switch to ON while pressing the shutter button halfway down with pressed the
MENU buttons.
5) Check that the remaining number of recordable images on the LCD monitor is "BBBB".
Note: When "BBBB" is displayed, the camera activates in the adjustment mode.
6) Start the flash adjustment program "FlashAdjustment.exe".
HVL-F56AM
5-3
button of controller keys and