TP-Link TL-SG1016DE User Manual page 42

The following entries are displayed on this screen:
Global Config

QoS Mode:
Port Based Priority Setting

Select:
Port:
Priority Queue:
LAG:
Figure 7-4 QoS Basic
Select the desired QoS mode.
Port Based:
• The packets are mapped to 4 priority levels based on
ingress port.
802.1P Based: The switch classifies the ingress packets
•
and maps the packets to different priority queues based
on the 802.1p priority field in the 802.1Q tag.
DSCP Based: The switch classifies the ingress packets
•
and maps the packets to different priority queues based
on the DSCP priority field in the IP ToS field.
Select the desired port for configuration. It is multi-optional.
Displays the port number.
Specify the priority queue the packets from the port are
mapped to. The priorities are labeled as 1~4 and among them
the bigger the value, the higher the priority.
Displays the LAG number which the port belongs to.
40