4.1.11
Attaching the GS05
to the CS10
step-by-step
4.1.12
Attaching the
CTR16/CTR17 to the
CS15 step-by-step
CS10/CS15 & GS Sensors, Operation
Setting up as Handheld GNSS
The setup GS05/CS10 is identical to the setup GS06/CS15. For simplicity, the setup
GS05/CS10 is used in the following.
2
0012605_001
Step
Description
Detach the slot cover from the CS10.
1.
Check the position of the contacts in the inner surface of the GS05.
2.
Attach the GS05 to the CS10.
3.
Press the screwdriver end of the supplied stylus on the quarter-turn screws
and tighten them.
4.
To achieve the optimal satellite tracking performance, mount the AS05
(external GNSS antenna) on the GS05.
Setting up as Robotic
2
0012606_001
Step
Description
Detach the slot cover from the CS15. Refer to "4.1.8 Fixing the Slot Cover
to the CS".
1.
Check the position of the contacts in the inner surface of the CTR16/CTR17.
2.
Attach the CTR16/CTR17 to the CS15.
3.
Press the screwdriver end of the supplied stylus on the quarter-turn screws
and tighten them.
1
3
1
3
4
43