Advertisement
CHANGING THE ROTATION SPEED (Fig. 7)
The rotation speed can only be changed when
the tool is at a standstill.
The gear setting button (10) is on the left side
of the housing. When the botton is in position
"1", the tool is in the low gear which is higher
torque for large diameter drilling and high
torque screwdriving.
When the botton is in position "2" the tool is in
the high gear which produces a higher speed
for more efficient drilling.
After use, check the tool to make sure that it is
in top condition. It is recommended that you take
this tool to a RYOBI Authorized Service Center
for a thorough cleaning and lubrication at least
once a year.
DO NOT MAKE ANY ADJUSTMENTS WHILE
THE MOTOR IS IN MOTION.
A LWAY S D I S C O N N E C T T H E P OW E R
CORD FROM THE RECEPTACLE BEFORE
CHANGING REMOVABLE OR EXPENDABLE
PARTS (BLADE, BIT, SANDING PAPER ETC.),
LUBRICATING OR WORKING ON THE UNIT.)
FEATURES
MAINTENANCE
SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE.
Page 6
10
WARNING:
To ensure safety and reliability, all repairs
should be performed by an AUTHORIZED
SERVICE CENTER. Please contact
Ryobi customer service 1300 361 505
for details
Fig. 7
Advertisement
