Advertisement
Quick Links
SPECIFICATIONS :
Power Input..................... 810 watt
Chuck Capacity............... 13 mm Keyless
Impacts Per Minute
Low ................................. 0 - 17600 min
High.................................0 - 44800 min
No Load Speed
Low................................ . 0 - 1100 min
High................................. 0 - 2800 min
DRILLING CAPACITY:
Steel .............................. 10 mm
Masonry ........................ 13 mm
Wood ............. ............... 25 mm
Net Weight ..................... 2.8 kg
THANK YOU FOR BUYING A RYOBI IMPACT DRILL
Your new impact drill has been engineered and manufactured to Ryobi's high standard for dependability,
ease of operation and operator safety. Properly cared for, it will give you years of rugged, trouble free
performance.
CAUTION: Carefully read through this entire owner's manual before using your
Pay close attention to the Rules for Safe Operation, Warnings, and Cautions.
If you use your impact drill properly and only for what it is intended, you will enjoy years of safe, reliable
service.
Thank You again for buying Ryobi tools.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
OWNER'S OPERATING MANUAL
810W IMPACT DRILL
MODEL EID8102VK
-1
-1
-1
-1
impact drill.
DOUBLE
INSULATED
N197
Advertisement
Related Manuals for Ryobi EID8102VK
Summary of Contents for Ryobi EID8102VK
- Page 1 THANK YOU FOR BUYING A RYOBI IMPACT DRILL Your new impact drill has been engineered and manufactured to Ryobi’s high standard for dependability, ease of operation and operator safety. Properly cared for, it will give you years of rugged, trouble free performance.
-
Page 2: Rules For Safe Operation
RULES FOR SAFE OPERATION The purpose of safety rules is to attract your attention to 9. DRESS PROPERLY. Do not wear loose clothing or jewellery. They can be caught in moving parts. Rubber gloves and possible dangers.The safety symbols and the explanations with non-skid footwear are recommended when working them, require your careful attention and understanding. - Page 3 FEATURES 1. Trigger Switch 7. Auxiliary Handle 2. Forward/Reverse Switch 8. Air Vents 3. Keyless Chuck 9. Drilling Mode Shift Button 4. Variable Speed Dial 10.Gear Setting Button 5. Lock - On Button 11. Spindle Lock Button 6. Depth Gauge Page 3...
- Page 4 FEATURES APPLICATIONS (Use only for the purposes listed below.) Drilling wood, materials and resin boards. Drilling concrete (impact drilling only). Drill metal, steel, brass, aluminum sheets, stainless steel & pipe. NOISE BUILD-UP Fig. 2 Noise (sound pressure level) in the workplace can exceed 85 dB (A).
-
Page 5: Drilling In Metal
FEATURES OPERATING NEVER COVER THE AIR VENTS (8) SINCE THEY MUST ALWAYS BE OPEN FOR PROPER MOTOR COOLING. DRILLING IN WOOD To prevent ugly splits around the drill hole on the reverse side of the work piece, put a piece of scrap timber under the work piece. -
Page 6: Maintenance
WARNING: in top condition. It is recommended that you take To ensure safety and reliability, all repairs this tool to a RYOBI Authorized Service Center should be performed by an AUTHORIZED for a thorough cleaning and lubrication at least SERVICE CENTER. Please contact once a year. - Page 7 RYOBI NEW ZEALAND PTY. LTD. AUCKLAND: 27 Clemow Drive, Mt Wellington, N.Z. Tel: (09) 573 0230 - Free Call: 0800 279 624 - Fax: (09) 573 0231 - www.ryobi.co.nz Contact during normal business hours. This Guarantee Form Should Be Retained By The Customer At All Times For your record and to assist in establishing date of purchase (necessary for in-guarantee service) please keep your purchase docket and this form completed with the following particulars.