Door - Samsung NX58M9960P series User Manual

To apply the graphite lubricant
NOTE
• Do not use a dishwasher to clean the racks.
• If a rack does not slide in and out smoothly, apply a few drops of cooking oil
to the oven rack guides.
• If a rack becomes too difficult to slide in or out, lubricate the rack.
• To purchase the graphite lubricant, contact us at 1-800-SAMSUNG (726-7864).
• For online shopping, visit http://www.samsungparts.com/Default.aspx and
search for part DG81-01629A.
NX9000K_CHEF_NX58M9960PS_AA_DG68-01008A-01_EN+MES+CFR.indb 27
1. Shake the graphite lubricant before
opening it.
2. Apply 4 drops of lubricant to the
inner side of the left sliding track, and
4 drops to the outer side of the left
sliding track.
3. Repeat step 2 above on the right sliding
track.
4. Extend and collapse the gliding rack
several times to distribute the lubricant.
CAUTION
• Do not leave racks in the oven during the self-cleaning cycle. The extreme
heat generated in this cycle can permanently peel off the racks' coating and
make it difficult to remove the racks.
• Do not spray cooking oil or lubricant directly onto the gliding rack.

Door

Do not remove the inner gasket of the oven door for cleaning.
Inner side
• Inner surface: Clean the inner side of the door manually using a soapy plastic
scouring pad, and then wipe with a dry cloth. Take care not to get the gasket
wet or allow moisture into the door.
• Inner glass: The inner glass is cleaned automatically during the self-cleaning
cycle.
Outer side
• Outer surface: Follow the cleaning instructions for the stainless steel surface in
the previous section.
• Outer glass: Clean the outer glass using a glass cleanser or soapy water. Rinse
and dry thoroughly. Take care not to get the gasket wet or allow moisture into
the door.
Do not let moisture enter the door or
contact the door gasket (*). Moisture may
*
reduce the gasket's performance.
CAUTION
English 27
2017-10-11 5:44:34