Sharp PJ-TA181 Service Manual page 9

REMOVE OF REEL SPRING ( For Model : PJ-SL181)
1. Remove the grille ass'y in accordance with "REMOVE OF GRILLE ASS'Y".
2. Slide up the slide shaft by press the adjustable knob.
3. Remove 2 screws holding to the motor ass'y with the slide shaft.
4. Remove 2 screws holding to the cable camp and slide shaft cover.
5. Remove the reel spring from the body.
6. Now the reel spring is free.
Reel spring
Body
Fig. 5
9
Motor ass'y
Hinge
Hinge support - B
Screw
Slide shaft
Body cover
Body
Slide shaft cover
Cable camp
Screw