Toyota Sequoia Manual page 366

366
5-4. Other interior features
4
Test the HomeLink
grammed button and observing the indicator light:
● Indicator light illuminates: Programming of a fixed code device
has completed. The garage door or other device should operate
when a HomeLink
● Indicator light flashes rapidly: The garage door opener motor or
other device is equipped with a rolling code. To complete pro-
gramming, firmly press and hold the HomeLink
onds then release it.
● If the garage door or other device does not operate, proceed to
"Programming a rolling code system".
5
Repeat the steps above to program another device for any of
the remaining HomeLink
■
Programming a rolling code system
2 or more people may be necessary to complete rolling code pro-
gramming.
1
Locate the "Learn" or "Smart"
button on the garage door
opener motor in the garage.
This button can usually be found
where the hanging antenna wire
is attached to the unit. The
name and color of the button
may vary
Refer to the Owner's manual
supplied with the garage door
opener motor for details.
2
Press
"Learn" or "Smart" button.
Perform
onds after performing
SEQUOIA_OM_USA_OM0C011U
®
operation by pressing the newly pro-
®
button is pressed and released.
®
buttons.
by manufacturer.
and release the
3
within 30 sec-
2
.
®
button for 2 sec-