Toyota Sequoia Manual page 216

216
4-3. Operating the lights and wipers
■
Temporarily lowering sensor sensitivity
The sensitivity of the sensor can be temporarily lowered.
1 Turn the engine switch off while the following conditions are met.
• The headlight switch is in
• The headlight switch lever is in high beam position.
• Automatic High Beam switch is on.
2 Turn the engine switch to the "ON" position.
3
Within 30 seconds after
original position then pushing it to the high beam position quickly 10 times,
then leave the lever in high beam position.
4
If the sensitivity is changed, the Automatic High Beam indicator is turn on
and off 3 times.
Automatic High Beam (headlights) may turn on even the vehicle is stopped.
■
If "Headlight System Malfunction Visit Your Dealer" is displayed on the
multi-information display
The system may be malfunctioning. Have the vehicle inspected by your
Toyota dealer.
SEQUOIA_OM_USA_OM0C011U
or .
2
, repeat pulling the headlight switch lever to the