Broadband Setting - FiberHome AN5506-01-A Product Manual

4 Web Configuration Guide
1. Select Network in the navigation bar and select LAN Settings
LAN Settings in the left link bar to open the LAN settings tab,
as shown in Figure 4.7.
2. Configure the management IP address and subnet mask at the
LAN side. See Table 4.2 for the parameter description.
3. Click Apply to save and apply the configuration.
Item Description
The management IP address at the LAN side of the ONU.
IP Address
The default value is 192.168.1.1.
The subnet mask of the ONU for the LAN. The default value
Subnet Mask
is 255.255.255.0.

4.3.2 Broadband Setting

Select different WAN connections for different network environment,
or configure corresponding parameters for the selected WAN
connection.
1. Select Network in the navigation bar and select BroadBand
Settings in the left link bar to open the Broadband setting tab,
as shown in Figure 4.8.
36
Figure 4.7
Table 4.2 Parameters of LAN Settings
LAN Settings