Connecting Two Speakers (Bridged Connection); Connecting Two Speakers And One Subwoofer (Unbridged Connection) - Radio Shack XL-260 Owner's Manual

12-2017.fm Page 14 Tuesday, May 9, 2000 10:02 AM

Connecting Two Speakers (Bridged Connection)

Caution: This connection produces 130
watts per channel. Use this connection only if
you have high-power speakers that can han-
dle a power output of 130 watts.
Note:
and
CH2 (+) CH4 (+)
tive (–) terminals for a bridged connection.
1. Use a screwdriver to connect the left
speaker's positive (+) wire to the ampli-
fier's terminal.
CH1 (+)

Connecting Two Speakers and One Subwoofer (Unbridged Connection)

CH1 Front
Left Speaker
1. Use a screwdriver to connect the front
left speaker's positive (+) wire to the
amplifier's terminal.
CH1 (+)
14
Left Speaker
are used as nega-
CH2 Front CH3 Rear
Right Speaker Subwoofer
Connecting Inputs
Right Speaker
2. Use a screwdriver to connect the left
speaker's negative (–) wire to the ampli-
fier's terminal.
CH2 (+)
3. Repeat Steps 1–2 to connect the right
speaker's positive (+) and negative (–)
wires to the amplifier's
terminals.
(+)
4. Set both switches (on the left
BRG/ST
and right sides of the amplifier) to
Or
CH4 Rear
Subwoofer
2. Use a screwdriver to connect the front
left speaker's negative (–) wire to the
amplifier's terminal.
CH1 (–)
and
CH3 (+) CH4
.
BRG