Card Connectors; Card Installation - Keithley 3706A User Manual

Section 2: Installation and connections

Card connectors

All connections will need to be made before the card is installed in the mainframe. Because the card
is rated at higher voltage than the mainframe, no backplane connectors are provided internal to the
card. Ensure that any signals connected to the multimeter or mainframe are limited to the allowable
ratings of the device. For more information about wire connections, see
preparation (on page 3-2).

Card installation

Slot covers must be installed on unused slots to prevent personal contact with high voltage
circuits. Failure to recognize and observe standard safety precautions could result in
personal injury or death due to electric shock.
2-2
Model 3762 10-Channel High Voltage Multiplexer Card User's Manual
Figure 2: 3762 screw terminal connectors
Wire selection and
3762-900-01 Rev. A / July 2017