Special Mode Table - Panasonic SA-BT230P Service Manual

7.2.

Special Mode Table 2

Mode name
Demonstration lock/ Ejection of the disc is prohibited.
unlock The lock setting is effective until unlocking the
tray
initialization
Progressive initialization The progressive setting is initialized to Inter-
lace.
Micro-P version check To check for main & sub firmware version
no., model no. & date of production.
Item
Description
and not released by Main
of service mode.
FL display
*When lock the tray.
unit
LOCK is displayed for 3 seconds.
*When unlock the tray.
UNLOCK is displayed for 3 sec-
onds.
*When press OPEN/CLOSE key
while the tray being locked.
Display LOCK for 3 seconds.
The display before
leaves.
FL Display
(i)
M-XXXX
Main Firmware Version
(ii) S-YYYY
Sub Firmware Version
(iii) AA/BB/CC
Date
ZZZZZZ
(iv)
Model No.
27
Key operation
Front Key
When the power is on, press
[PLAY] and [OPEN/CLOSE] keys
simultaneously for 5 seconds.
Note:
When a disc is not in tray, this
setting is not effective.
When the power is on, press
[PLAY] and [OPEN/CLOSE] keys
simultaneously for 5 seconds.
Press [OPEN/CLOSE] key while the
tray is being locked.
execution When the power is on (SS mode),
press [STOP] and [PLAY] simulta-
neously for 5 seconds.
When the power is on, press &
hold [SKIP REV] on remote control
follow by [POWER] on main unit.