Maintenance; Warranty - Safescan 1200 Manual

ENGLISH | nEdErlandS | dEutSch | FrançaiS | ESpañol | italiano | portuguêS
• Batch Count Mode
in this mode, the machine counts and sorts a batch of coins according to a preset number for each coin
denomination. Press the "SET" key followed by pressing the "+" and "-"keys to set the batch size. Repeat this for all
coin denominations. then press the "Start/Stop" key to start counting and sorting.
3. When fi nished counting, press the "START/STOP" key to stop the machine. The total value is shown in the display.
4. By pressing the "REPORT" key, the individual quantity for each coin denomination is shown in the display.
press the "rEport" key again to select the different coin denominations.
5. If available: it is also possible to sort and stack coins with the 8 included coin tubes instead of the coin trays.
The stacked coins can then easily be fi lled into coin wrappers for bank-ready coin rolls.

3. Maintenance

Clean the coin counter with a soft, clean cloth. Do not use aggressive or abrasive cleaners. Never insert any hard
objects into the slot.
4. Technical specifi cations
Operating temperature:
Ambient humidity:
Capacity hopper:
Capacity receiving slot:
Capacity coin tubes:
Batch preset number display:
Counting number display:
Power source:
Power consumption:
Dimensions:
Net weight:
Counting speed:

5. Warranty

Warranty procedure
Contact Safescan for assistance: www.safescan.com
This product is in compliance with the essential requirements and other relevant
provisions of the applicable European directives. The Declaration of Conformity (DoC) is
available at www.safescan.com
If possible, bring the machine to a recycling centre after usage. Do not throw away the
product with the household waste.
o o
0 ~ 40 celsius
30 ~ 80%
300 ~ 500 coins
80 ~ 150 coins
40 ~ 50 coins
3-digit lEd
4-digit lEd
ac220V / 50hZ
45W (max)
355 x 330 x 266 mm
4.5 kg
220 coins per minute
3