Reviewing Locked-Out Channels; Locking Out Frequencies; Reviewing Locked-Out Frequencies - Radio Shack PRO-97 Manual

Beyond the Basics
You can still manually select locked-out channels.
Notes Notes
To remove the lockout from a channel, manually select the
channel and press L/OUT so LO changes to lo.

reviewing locked-out channels

To review all locked out channels, press MAN. Then repeatedly
alternate between pressing FUNC and then L/OUT to view each
locked-out channel. When you fi nish reviewing locked-out
channels, press MAN.

locking out frequencies

To lock out a frequency during a search, press L/OUT when the
scanner stops on that frequency. The scanner locks out the
frequency, then continues searching.
The scanner does not store locked out frequencies during
Notes Notes
a search.
You can lock out as many as 50 frequencies in each bank.
If you try to lock out more, L/O Memory Full! appears.
If you lock out all frequencies in one search bank and
only this search bank is activated, All ranges Locked out!
appears and the scanner does not search.

reviewing locked-out frequencies

To review the frequencies within a search bank that you
locked out:
1. Press SRCH to set search mode.
2. Press FUNC then L/OUT. The locked-out frequency and Lockout
list appear. Press
number and the total locked-out number also appears
as Lockout XX of YY. (The tenth of thirty locked out number
would appear as Lockout 10 of 30). If the search bank has no
locked-out frequencies, No Lockout appears. Press FUNC then
or to review the list. The locked-out
e d
56