Using The Belt Clip; Transferring Data To Or From Another Scanner Or Pc - Radio Shack PRO-97 Manual

The Basics

using the belt clip

To make your scanner easier to
carry when you are on the go, use
the supplied belt clip by attaching
it to the back of the scanner. To
remove the battery clip, slide
it upward while pulling the tab
toward you.
transferring data to or
from another scanner or
PC
You can transfer the programmed data to and from another
PRO-97 scanner using a connecting cable which has 1/8
-inch phone plugs on both ends (not supplied). Connect
the cable between each scanner's PC/IF jacks. See "Cloning
the Programmed Data". You can also upload or download
the programmed data to or from a PC using an optional PC
interface kit available through your local RadioShack store.
19