Scanning The Stored Channels; Using The 2-Second Delay - Radio Shack PRO-66 Owner's Manual

20-511.fm Page 26 Wednesday, August 4, 1999 2:13 PM
4. Press . The entered frequency appears, and the channel
MON/0
number starts flashing.
5. Press . The scanner stores the frequency into the selected
WX/E
channel, and the channel number stops flashing.

SCANNING THE STORED CHANNELS

To scan the stored channels, press
through all non-locked channels (see "Locking Out Channels" on
Page 27).

Using the 2-Second Delay

Many agencies use a two-way radio system that has a period of several
seconds between a query and a reply. To avoid missing a reply, you can
program a 2-second delay into any channel. When the scanner stops on
an active channel with a programmed delay, it continues to monitor the
channel for 2 seconds after the activity stops before resuming scanning.
To program a 2-second delay into a specific channel while the scanner
is scanning, manually select the desired channel then press
appears on the display.
To program a 2-second delay when the scanner has stopped on an ac-
tive channel during scanning, quickly press
number is displayed. D appears on the display.
26
. Your scanner then scans
SCAN
DELAY
while the channel
DELAY
.
D