Direct Search - Radio Shack PRO-66 Owner's Manual

20-511.fm Page 23 Wednesday, August 4, 1999 2:13 PM
3. To change the search direction, press t to search downward or s to
search upward. ,
b SRCH
4. When the scanner stops on an active frequency, you can do one of
the following:
• To store the displayed frequency into the monitor memory,
press . MON
MON/0
• To continue the search, press t or s.
• To hold the frequency, press
display. To continue the search, press and hold t or s for about 1
second. Or, you can press
The scanner briefly displays the frequency band (if you pressed
), then resumes searching.
HOLD/BAND
Notes:
• If you want to step through the frequencies while
press t or s.
• If you tune to a search skip frequency,
See "Search Skip Memory" on Page 24.
• If you want to change the frequency band, repeatedly press
. The selected frequency band is displayed.
HOLD/BAND

Direct Search

You can search up or down for more frequencies from the currently dis-
played frequency.
1. Press .
MANUAL
2. Use the number keys and
ing the decimal point) where you want to start the search, or enter
the channel number containing the starting frequency and press
.
MANUAL
3. Press t to search downward or s to search upward from the
selected frequency.
4. When the scanner stops on a transmission, you can do one of the
following:
• To store the displayed frequency into the monitor memory,
press
MON/0. MON
, and t or s appear on the display.
appears on the display.
HOLD/BAND
to continue the search.
HOLD/BAND
L appears on the display.
to enter the frequency (includ-
CLEAR/•
d , SRCH , and t or s appear on the display.
appears on the display.
. H appears on the
H is displayed,
23