Locking Out Ids; Unlocking A Single Id; Unlocking All Ids - Radio Shack HANDHELD TRUNKING 20-521 Owner's Manual

Locking Out IDs

As with conventional scanning, it is possible to lock out
unwanted traffic. This is particularly important in trunk-
ed systems because signals you cannot listen to (such
as water meters, door alarms, traffic signals, and en-
crypted signals) are assigned IDs just like other users.
You can have up to 100 IDs locked out at one time.
Note: If you lock out an ID while searching, it is also
locked out of the scan list(s). See "Scan Lists" on
Page 48.
To lock out an ID, press
The ID is locked out, and the next active ID appears.

Unlocking a Single ID

1. Hold down
2. Repeatedly press t or s to select the ID you want to
unlock.
3. Press
L-OUT
The ID is unlocked, and the next locked ID or
–– –––
4. Press
SRC
tion.

Unlocking All IDs

Hold down
L-OUT
press to unlock all the IDs at once. The scanner
E
beeps twice.
Note: When you unlock all the IDs, the scan list ap-
pears. Press
lists or press
function. For more information about scan lists, see
"Scan Lists" on Page 48.
L-OUT
until you hear two short beeps.
L-OUT
.
(if there are no other locked IDs) appears.
to continue the scanner's previous func-
until you hear two short beeps. Then
to scan the IDs stored in your scan
SCAN
to continue the scanner's previous
SRC
when the ID appears.
45