Searching For And Temporarily Storing Active Frequencies; Limit Search - Radio Shack PRO-2048 Owner's Manual

20-417.fm Page 20 Wednesday, August 4, 1999 11:33 AM
SEARCHING FOR AND
TEMPORARILY
STORING ACTIVE
FREQUENCIES
You can search for frequencies using
a limit or direct search, then tempo-
rarily store frequencies into monitor
memories.

Limit Search

A limit search lets you search for ac-
tive transmissions within a specified
range of frequencies.
Note: You can also use the scan-
ner's delay feature while using a limit
search (see "Using the 2-Second De-
lay" on Page 27).
Follow these steps to search for ac-
tive frequencies using a limit search.
1. Press , then
PGM
frequency appear.
2. Using the number keys, enter
the lowest frequency (including
the decimal point) you want to
search within the desired fre-
quency range,
.
ENTER
20
. and a
LIMIT Lo
then press
Note: If you enter an invalid fre-
quency, appears. To cor-
Error
rect this, simply repeat the step.
3. Press LIMIT . Hi and a frequency
appear.
4. Using the number keys, enter
the highest frequency you want
to search within the desired fre-
quency range,
.
ENTER
5. Press D to search upward from
the lower to the upper limit, or
press — to search downward
from the upper to the lower limit.
, , and s or t
-L- SEARCH
appear, and the next available
monitor memory flashes.
then press