Table of Contents
Advertisement
116 Maintenance
Replacing the battery in the assistant control panel
A battery is only used in assistant control panels that have the clock function. The battery
keeps the clock operating during power interruptions.
The expected life for the battery is greater than ten years.
Note: The battery is NOT required for any control panel or drive functions, except the
clock.
1. To remove the control panel from the drive, press the retaining clip at the top and pull it
forward from the top edge.
2. Disconnect the panel cable.
3. To remove the battery, use a coin to rotate the battery cover on the back of the control
panel.
4. Replace the battery with type CR2032. Dispose the old battery according to local
disposal rules or applicable laws.
5. To reinstall the control panel, press the retaining clip at the top (5a) and push the
control panel in at the top edge (5b)
1
2
3
5a
5b
Advertisement
Table of Contents
