JVC KV-DV50 Instructions Manual page 23

Symptom
• The left and right edges of the picture
are missing on the monitor.
• Tracks cannot be played back.
• Noise is generated.
• Longer readout time is required.
• Tracks cannot play back as you had
intended them to play.
• No sound can be heard when the picture
is displayed while playing a DivX/MPEG
Video file.
• Elapsed playing time is not correct.
Remedy/Cause
Select "4:3 LETTERBOX" (see page 16).
• Record the tracks using a compliant application on the
appropriate discs (see page 4).
• Add the extension code <.divx>, <.div>, <.avi>, <.mpg>,
<.mpeg>, <.mp3>, <.wma>, or <.wav> to the file
names.
The track played back is not an MP3/WMA/WAV track. Skip
to another track. (Do not add the extension code <.mp3>,
<.wma>, or <.wav> to non-MP3/WMA/WAV tracks.)
• Readout time varies according to the complexity of the
folder/file configuration.
• Do not use too many hierarchical levels, folders, or empty
folders*.
• Turn off the power then on again.
* A folder that is physically empty or that contains data but does
not contain valid MP3/WMA/WAV tracks.
Playback order was determined when the files were recorded.
• Record the audio track using MP3 or Dolby Digital for the
audio stream of DivX files.
• Record the audio track using MPEG1 Audio Layer 2 as the
audio stream for MPEG Video files.
This sometimes occurs during playback. This is caused by how
the tracks were recorded.
REFERENCES 23