References; More About This Unit - JVC KV-DV50 Instructions Manual

Table of Contents

Advertisement

More about this unit

Playing Recordable/Rewritable discs
• This unit can recognize a total of 3 500 files and 250
folders (a maximum of 999 files per folder).
• This unit can recognize a total 25 characters for file/
folder names.
• Use only "finalized" discs.
• This unit can play back multi-session discs; however,
unclosed sessions will be skipped during playback.
• Some discs or files may not be played back due to
their characteristics or recording conditions.
• Rewritable discs may require a longer readout time.
Playing DivX files
• This unit can play back DivX files with the extension
code <.divx>, <.div>, <.avi> (regardless of the
letter case—upper/lower).
• This unit supports DivX 6.x, 5.x, 4.x, and 3.11.
• This unit can display a unique registration code—
DivX Video-on-Demand (VOD—a kind of Digital
Rights Management). For activation and more
details, visit <www.divx.com/vod>.
• Audio streams should conform to MP3 or Dolby
Digital.
• This unit does not support GMC (Global Motion
Compression).
• Files encoded in an interlaced scanning mode may
not be played back correctly.
• This unit cannot play back the files encoded in Codec
(Compressor-decompressor) other than DivX Codec.
• The maximum bit rate for video signals (average) is
4 Mbps.
• If you want to know more about DivX, visit
<http://www.divx.com>.
Playing MPEG Video files
• This unit can play back MPEG Video files with the
extension code <.mpg> or <.mpeg>.
• The stream format should conform to MPEG system/
program stream.
• The file format should be MP@ML (Main Profile at
Main Level)/SP@ML (Simple Profile at Main Level)/
MP@LL (Main Profile at Low Level).
• Audio streams should conform to MPEG1 Audio
Layer 2.
• This unit cannot play back the following files:
– WMV (Windows Media Video) files
– RM (Real Media) format files
• The maximum bit rate for video signals (average) is
4 Mbps.
Playing MP3/WMA/WAV files
• This unit can play back files with the extension code
<.mp3>, <.wma>, or <.wav> (regardless of the
letter case—upper/lower).
• This unit can play back MP3/WMA/WAV files meeting
the conditions below:
MP3:
– Bit rate: 32 kbps — 320 kbps
– Sampling frequency:
48 kHz, 44.1 kHz, 32 kHz (for MPEG-1)
24 kHz, 22.05 kHz, 16 kHz (for MPEG-2)
WMA:
– Bit rate: 32 kbps — 320 kbps
– Sampling frequency: 48 kHz, 44.1 kHz, 32 kHz,
22.05 kHz
– Channel: Mono/stereo
WAV:
– Sampling frequency: 44.1 kHz
– Channel: 1 ch/2 ch
• This unit can recognize a total of 3 500 files and 250
folders (999 files per folder).
• The maximum number of characters for folder and
file names is 25 characters; 128 characters for MP3/
WAV Tag, 128 characters for WMA Tag.
• This unit can show ID3 Tag (Version 1.0, 1.1, 2.2, 2.3,
or 2.4) for MP3 and show WMA/WAV Tag.

REFERENCES

Continued on the next page
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents