Sounds Settings - UTStarcom CDM-8960 User Manual

MENU FUNCTION
 The handset will prompt you for the passkey.
Consult the Bluetooth accessory instructions for the
appropriate passkey (typically "0000" - 4 zeroes).
Enter the passkey and press
The default PIN code may differ depending on Bluetooth
devices. Please refer to the user guide of the Bluetooth
device that you wish to use.
 Once pairing is successful, select "Yes" and press
to connect with the device.
 Once paired, you will see the device listed in the
"1. Add New Device" menu.
By pressing Right Soft Key
choose from the following:
Remove Device: Removing a device from the paired list.
Rename Device: Renaming the paired device.
Incoming Security: To Select "Always Ask" or "Always
Connect".
Device Info: Reviewing information about the paired
device.
64
SETTINGS
.
[OPTIONS], you can
SETTINGS
H SOUNDS SETTINGS
CALL SOUNDS
To select a ringer type for incoming calls:
CALL RINGTONE
 Press [MENU], then press the Navigation Key
right 2 times for the "Settings & Tools" menu. Press
for Sound Settings, then
and then for Call Ringtone.
 Select your desired ringer type.
Up or Down key: 1. Get New Ringtones or select your
•
desired ringer type.
• Press Left Soft Key
 Select one of the available ring types.
To confirm, press
CALL VIBRATE
 Press [MENU], then press the Navigation Key
right 2 times for the "Settings & Tools" menu. Press
for Sound Settings, then
and then for Call Vibrate.
 Select "On" or "Off" with the Navigation Key
then press to save it.
MENU FUNCTION
for Call Sounds,
[PLAY/STOP] to play/stop sound.
.
for Call Sounds,
and
65