System Setting; Password Setting; System Upgrade - Monacor DMR-520NT User Manual

5.6 System Setting

5.6.1 Password Setting

Right-click to display the main menu, and select "SYSTEM"
TOOLS
SYSTEM INFO
USB BACKUP
DVD BACKUP
EXIT
1) ADMIN PASSWORD
Click "SETUP" to change the administrator password. The default administrator
password is 0000.
When you're prompted to enter the DVR password, enter the administrator
password, and
are allowed.
2) OPERATOR PASSWORD
Click "SETUP" to set or change the operator password. .
When you're prompted to enter the DVR password, enter the operator password,
and will be shown on the status bar of the screen and the main menu is NOT
allowed to access.

5.6.2 System Upgrade

Note: DVR system upgrade might cause all HDD data cleared when your current
system version is too old from the latest version. Therefore, before
upgrading the DVR system, check your current firmware version with your
installer or distributor, and make video backup if necessary.
Right-click to display the main menu, and select "SYSTEM"
Save the upgrade files obtained from your installer or distributor in a compatible USB
flash drive, and insert it into the USB port at the front panel.
Then, click "SUBMIT" to start upgrading.
SYSTEM
LANGUAGE
ADMIN PASSWORD
OPERATOR PASSWORD
UPGRADE
BACKUP CONFIG
(For Selected Models Only)
RESTORE CONFIG
(For Selected Models Only)
will be shown on the status bar of the screen and all operations
27
FREQUENTLY-USED FUNCTIONS
"TOOLS".
ENGLISH
SETUP
SETUP
SUBMIT
SUBMIT
SUBMIT
"TOOLS" "UPGRADE".