Table of Contents
Advertisement
Troubleshooting
Phenomena that may be easy to be mistaken for machine defects (continued)
Phenomenon
74
Cases not involving a machine defect
The batteries in the remote control are near the end.
The ID numbers set in the projector and the remote
control are different.
The FREEZE function is working.
FREEZE
Color settings are not correctly adjusted.
COLOR SPACE setting is not suitable.
The brightness and/or contrast are adjusted to an
extremely low level.
The projector is operating in Eco mode.
The light source is approaching the end of its
product lifetime.
The lens cover is attached.
Either the focus and/or horizontal phase settings are
not properly adjusted.
The lens is dirty or misty.
FOCUS + / -
Caring for the lens
Reference
page
21
22
39
53
48
55
–
–
68
Advertisement
Table of Contents
