AVGear AVG-HDWP70HD User Manual

Hdbt wallplate transmitter dual hdmi inputs

Advertisement

Quick Links

AVG-HDWP70HD
The AVG-HDWP70HD is a Decora style
transmitter that installs in a double-gang
wall box to provide a convenient interface
for 2 x HDMI input sources.
Features
Two individual HDMI inputs
Supports HDMI signal up to 4K@60Hz
4:2:0
Ensures display of content protected
media and interoperability with other
HDCP compliant devices.
HDBaseT Technology extends HDMI
and control signals up to 70m over
CatX cable.
Automatically detect active inputs
when sources are connected.
Flexible control options for
compatibility with third party systems,
matrix switcher or HDBT receivers.
Supports bi-directional RS232 pass-
through with the HDBaseT connection
and local control.
PoH (power over HDBaseT) allows it
to be powered by the receiver.
Can provide power for devices like the
WP8 Control panel.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AVG-HDWP70HD and is the answer not in the manual?

Questions and answers

Summary of Contents for AVGear AVG-HDWP70HD

  • Page 1 HDBT receivers. Supports bi-directional RS232 pass-  through with the HDBaseT connection and local control. The AVG-HDWP70HD is a Decora style  PoH (power over HDBaseT) allows it transmitter that installs in a double-gang to be powered by the receiver.
  • Page 2 PLEASE READ THIS PRODUCT MANUAL CAREFULLY BEFORE USING THIS PRODUCT. This manual is only for operation instruction only, and not to be used in a maintenance capacity. The functions described in this version are current as at September 2017. Any changes of functions and operational parameters will be updated in future manual versions.
  • Page 3 AVG-HDWP70HD SAFETY OPERATION GUIDE In order to guarantee the reliable operation of the equipment, please abide by the following procedures in installation, use and practice. Please save this manual for further reference. 1. Unpack the equipment carefully and save the original box and packing material for possible future shipment 2.
  • Page 4: Table Of Contents

    AVG-HDWP70HD TABLE OF CONTENTS Introduction ......................1 Introduction to the AVG-HDWP70HD ............1.1 Features ....................... 1.2 Package List ....……………………………………………………………………2 Product Appearance ....................3 Front Panel ....................3.1 Rear Panel ....................3.2 System Connection ....................4 System Application ..................4.1 Usage Precautions ..................
  • Page 5: Introduction

    1. Introduction 1.1. Introduction to the AVG-HDWP70HD The AVG-HDWP70HD is a Decora style transmitter that installs in a double-gang wall box to provide a convenient interface for two HDMI input sources. It has 2 HDMI IN and 1 HDBaseT OUT with PoH.
  • Page 6: Product Appearance

    AVG-HDWP70HD 3. Product Appearance 3.1. Front Panel Name Description POWER LED indicator illuminates red when power is applied. ① LINK LED indicator illuminates green when a HDBaseT link is established. ② HDCP LED indicator illuminates green when a HDCP link is established.
  • Page 7: Rear Panel

    ② 12V input, connects with power adapter. ③ 12V output, connects with Control Panel to energize it. Serial port for control of the AVG-HDWP70HD and a third-party device via ④ RS232 RS232 commands. Please refer to the 5.2. RS232 Control for more details.
  • Page 8: System Connection

    AVG-HDWP70HD 4. System Connection 4.1. System Applications Reliable performance for control and transmission makes the AVG-HDWP70HDideal in the IT computer space, signal monitoring, big screen displays, conference systems, television broadcast, education, banking and security institutions etc. 4.2. Usage Precautions 1. System should be installed in a clean environment with temperature and humidity maintained to within equipment specification.
  • Page 9: Connection Procedure

    AVG-HDWP70HD 4.4. Connection Procedure 1. If installing in a back-box, it is recommended that the transmitter be installed in a 4-5/8” square box at a minimum. The 4-5/8” square box has sufficient space to terminate the cables with jacks behind the unit when fully installed.
  • Page 10: Operations

    AVG-HDWP70HD 5. Operations 5.1. Operations of the front panel buttons Press and hold the SOURCE/AUTO button for approximately 3 seconds. When the button lights up green the transmitter is in AUTO mode. This mode automatically selects the last video source connected to the transmitter and outputs it to the display.
  • Page 11: Installation/Removal Of Rs232 Control Software

     Removal: Delete all the control software files in corresponding file path. 5.2.2. Basic Settings First, connect the AVG-HDWP70HD with all the input devices and output devices required, then connect it to a computer which has the installed RS232 control software. Double-click the software...
  • Page 12 AVG-HDWP70HD Here we take the software CommWatch.exe as example. The icon is showed as below: The interface of the control software is showed as below: Parameter Configuration area Monitoring area, indicates if the Command Sending area Please set the parameters of COM number, baud rate, data bit, stop bit and the parity bit correctly,...
  • Page 13 AVG-HDWP70HD RS232 Control Baud rate: 9600 Data bit: 8 Stop bit: 1 Parity bit: none Control Mode Switching Command Description Feedback Example Switch to RS232 mode 1 (Default), control the RS232 Mode 1: RS232 Control 50779% transmitter and the far-end third-party device.
  • Page 14: Specification

    AVG-HDWP70HD 6. Specification Input & Output Input (2) HDMI; (1) 12V POWER ; (2) 19-pin Type A female HDMI; Input Connector (1) 2-pin Phoenix plug Output (1) HDBaseT; (1) 12V POWER Output Connector (1) RJ45; (1) 2-pin Phoenix plug Transmission Mode...
  • Page 15: Panel Drawing

    AVG-HDWP70HD 7. Panel Drawing 32.0mm POWER LINK RESET SOURCE/AUTO RS232 HDMI 1 HDMI 2 HDMI IN 1 HDMI IN 2 FIRMWARE 89.0 mm Note: Pictures shown in this manual are for reference only.
  • Page 16: Troubleshooting & Maintenance

    AVG-HDWP70HD 8. Troubleshooting & Maintenance Problems Causes Solutions Color loss or no video signal output on HDMI display No HDMI signal output The connecting cables Check whether the cables are connected on the device while may not be connected correctly and in working condition.

Table of Contents