Setting Time (Disp); Change Bands (Band); Automatic Store Preset Station (Ams); Select The Track Or File For Playback In Mp3 Format - Boss Audio Systems 616UAB User Manual

Operating Instructions
Setting Time
Press and hold the SRC/DISP button to display time. Press the SRC/DISP button again, the hours digits
start flashing on the display. Set hours by rotating the VOL knob.
Press the SEL button (VOL knob) again. The minute digits start flashing.
Set minutes by rotating the VOL knob.
Press the SRC/DISP button to confirm your settings.
Change Bands
In radio mode, shortly press the BAND/AMS button to switch between the FM1(F1), FM2(F2), FM3(F3)
and AM1(A1), AM2(A2) bands.

Automatic Store Preset station (AMS)

Press and hold the BAND/AMS button to start the automatic station scanning. The search process can
take some minutes. The stations are stored according to signal strength. Then, the saved stations are
played for a short time. Press any station button to quit the operation.
Briefly press the BAND button on the remote control to scan each preset station in each band.

Select the track or file for playback in MP3 format

a) Press and hold the BAND/AMS button to enter track search mode. First "TRK0000" will appear on the
display.
b) Rotate the volume knob and select the "first number".
number" to the left and enter the next number.
c) When the desired track number appears, confirm your selection by pressing SEL button (VOL knob).
If no any operation in 5 seconds,it will play the current track.
LCD Display

To Store / Recall Preset Stations

The radio can be stored 6 preset stations for each band (FM1, FM2, FM3,AM1 and AM2) for atotal of 30
preset stations.
- To memorize a station:
Press and hold one of the six preset buttons (1-6) to save a radio station.
- To recall a preset station:
Briefly press the respective station button (1-6) to recall the corresponding preset station.

Play / Pause

Press the button to interrupt the playback of a music title (pause function). Press this button again to
continue the playback.

Introduction Scan

Press the INT button to play the first 10 seconds of all track. Press again to stop theintroduction scan, and
play the current track.

Repeating the track

Press the RPT button to toggle between RPT ALL (Play all track), RPT FLR (Continuously repeats all
tracks in current folder) and RPT ONE (Continuously repeats current track).

Playing all tracks in random

Press the RDM button. A random playback of all tracks will start. Press the button again to set the normal
playback.

Track/Folder Navigation

- Press the -10/+10 buttons to jump 10 tracks backward or forward. It is required that over 10 tracks be
available on the storage medium.
- Press and hold the F-/F+ button to select the previous or the next folder. (If there are folders on the
storage medium.)
IR remote sensor
5