Electrical Connections - JVC KD-DV4206 Installation & Connection Manual

ELECTRICAL CONNECTIONS

A
Typical connections
Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit.
The leads of the power cord and those of the connector from the car body may be different in color.
1
Connect the colored leads of the power cord in the order specified in the illustration below.
2
Connect the antenna cord.
3
Finally connect the wiring harness to the unit.
VIDEO OUT (see diagram
Antenna connector
DIGITAL OUT
(see diagram
Line out (see diagram
* 2
Before checking the operation of this unit prior to
installation, this lead must be connected, otherwise
power cannot be turned on.
White with black stripe White
Left speaker (front)
B
Connecting the parking brake wire
When installing the monitor in a location where it can be seen by the driver
Parking brake
When installing the monitor in a location where it cannot be seen by the driver
Connect the parking brake wire to metallic body or chassis or the car.
C
Connecting the crimp connector
Wire connecting the battery and the parking brake switch.
Attach the parking brake wire to this point.
Rear ground terminal
)
To external components (see diagram
15 A fuse
)
Black
*
Yellow
)
Red
Blue
Blue with white stripe
Light green
Gray with black stripe
Right speaker (front)
Parking brake switch (inside the car)
)
To metallic body or chassis of the car
2
To a live terminal in the fuse block connecting to the car battery (bypassing
the ignition switch) (constant 12 V)
To an accessory terminal in the fuse block
To automatic antenna if any (250 mA max.)
To the remote lead of other equipment (200 mA max.)
Gray Green with black stripe
Parking brake wire (light green)
Contact the metallic part of the crimp to the wires inside.
3
* 1
Not supplied for this unit.
To parking brake, metallic body or chassis of the car
Green Purple with black stripe
Left speaker (rear)
Parking brake wire (light green)
To metallic body or chassis of the car
* 3 Not supplied for this unit.
Pinch the crimp firmly.
Ignition switch
Fuse block
Purple
Right speaker (rear)