Frequently Asked Questions - Titan SF2842 Safety And Operating Manual

started. With the blade guard held firmly against
the work surface, start a slow but controlled
upward swing of the saw. The blade will cut into
and through the material. Always ensure the
blade is completely through the material before
cutting the remainder of the pocket.
12. Disposal of an exhausted battery pack
To preserve natural resources, please recycle
or dispose of the battery pack properly.
This battery pack contains nickel-cadmium
Fig 11
batteries. Consult your local waste authority for
information regarding available recycling and/or
disposal options. Discharge your battery pack
by operating your saw, then remove the battery
pack from the saw housing and cover the battery
pack connections with heavy duty adhesive tape
to prevent short circuit and energy discharge.
Do not attempt to open or remove any of the
components.
WORKING HINTS FOR YOUR
RECIPROCATING SAW
If your power tool becomes too hot, set the speed
to maximum and run no load for 2-3 minutes to
cool the motor.
Always ensure the work-piece is firmly held or
clamped to prevent movement.
The pivoting foot must be held firmly against the
material being cut to reduce saw vibration, blade
jumping and blade breakage.

FREQUENTLY ASKED QUESTIONS

1. Why does the saw not turn on when you
press the switch?
The lock off switch (1) is locked and you must
depress the button (2) first (See fig3).
2. The saw blade move slowly, Why?
If the battery is not fully charged, recharge the
battery with the supplied battery charger.
Note: Do not charge the battery with a different
charger. Charge battery pack only with the charger
provided.
18V RECIPROCATING SAW SF2842
SF2842 CSR18P-M-060425.indd 13 2006-5-25 11:18:33