Health Advice - Titan SF2842 Safety And Operating Manual

contacts eyes, additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
6. Service
a. Have your power tool serviced by a qualified repair person using
only identical replacement parts. This will ensure that the safety of the
power tool is maintained.

HEALTH ADVICE

WARNING! When drilling, sanding, sawing or grinding, dust particles will be
produced. In some instances, depending on the materials you are working with,
this dust can be particularly harmful to you (e.g. lead from old gloss paint).
You are advised to consider the risks associated with the materials you are working
with and to reduce the risk of exposure.You should:
- Work in a well-ventilated area.
-Work with approved safety equipment, such as those dust masks that are specially
designed to filter microscopic particles.
ADDITIONAL SAFETY INSTRUCTIONS FOR YOUR
CORDLESS RECIPROCATING SAW
1. Remove the battery pack from the saw before carrying out adjustments.
2. Do not expose to rain or water.
3. Charger is for indoor use only.
4. Do not store the battery pack in temperatures over 40
5. Always charge the battery pack between temperatures 0
temperature is 15
o
6. Only use the charger and the battery pack provided, no others.
7. Avoid short circuit of the battery pack connections (screws & nails).
8. Do not incinerate or burn the battery pack, it may explode.
9. Do not charge a damaged battery pack.
10. Do not charge non-rechargeable batteries.
11. Replace any damaged supply cords on your charger in an approved service centre.
12. Always disconnect the charger power supply before making or breaking the
connections to the battery pack.
13. Battery pack and charger will be warm during charging, this is normal.
14. When not in use, remove a charged battery pack from the tool.
15. Always remove the battery pack from the charger immediately after re-charging is
completed.
16.Your saw and battery pack will be warm when working, this is normal.
17. Remove the plug from the socket before carrying out any adjustment, servicing or
maintenance.
18. Fully unwind cable drum extensions to avoid potential overheating.
19. When an extension cable is required you must ensure it has the correct ampere
rating for your power tool and is in a safe electrical condition.
20. Ensure your mains supply voltage is same as indicated on the rating plate.
SF2842 CSR18P-M-060425.indd 6
C - 25 C.
o
C.
o
C to 30 C. Ideal charging
o o
2006-5-25 11:18:27