Connect Settings (Menu 9.8) - Samsung SGH-E720 Manual

Settings
SIM lock
(Menu 9.7.6)
When the SIM Lock feature is enabled, your phone
only works with the current SIM. You must enter
the SIM lock code to use a different SIM card.
To unlock the SIM card, you must enter the SIM
lock code.
FDN mode
(Menu 9.7.7)
FDN (Fixed Dial Number) mode, if supported by
your SIM card, allows you to restrict your outgoing
calls to a limited set of phone numbers.
Change PIN2
(Menu 9.7.8)
The Change PIN2 feature allows you to change your
current PIN2 to a new one.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu does not display.
Connect settings
(Menu 9.8)
You can customize the profiles containing the
settings for connecting your phone to the network.
You need these settings to use the WAP browser or
send MMS messages or e-mails.
Note: Your phone is suited for connecting to the
network by default. If you change the MMS
settings without first checking with your
service provider, the WAP, MMS, and e-mail
features may not work properly.
166
Changing a profile
For each profile, the following options available:
Profile name: enter a name that you wish to
assign to the profile.
Home URL: enter the address of the WAP
homepage of your service provider.
Proxy: activate or deactivate the proxy server.
When you checked this option, the IP address and
Port options are activated. Enter the IP address
and the port number.
DNS: activate or deactivate the DNS address.
When you checked this option, DNS1 and DNS2
options are activated. Enter the DNS addresses.
Bearer: select the network bearer type, either
GPRS or GSM.
Advanced: select to change the advanced options.
Depending on the bearer setting, available options
vary.
When the bearer is set to GPRS:
APN: enter the access point name.
Login ID: enter the login ID.
Password: enter the login password.
When the bearer is set to GSM:
Dial number: enter the PPP phone number.
Login ID: enter the login ID.
Password: enter the login password.
Data call type: select a call type for data
transmission.
Settings
167