Samsung SGH-E720 Manual page 60

Messages
• Read confirm: your phone sends a request for a
reply along with your e-mail to the recipient.
• Priority: you can select the priority level of your
e-mail.
• Include signature: attaches your name, phone
number, a simple memo, or tag line as a
signature to your e-mail. Remaining options are
available when you activate this option.
• Edit name: you can set the name in your
signature.
• Edit telephone number: you can set the phone
number in your signature.
• Edit note: you can set the tag line in your
signature.
Receiving settings: allows you to change the
default settings for receiving an e-mail.
• Check interval : allows you to select how often
the phone automatically checks the server for
incoming e-mail. If this option is set to Not used,
you need to manually check the server by
selecting Check new mail in the E-mail box
folder.
• Read reply: allows you to set whether or not the
phone sends a read-reply request to the sender.
• Retrieve option: you can select whether or not
the phone retrieves headers only or whole
e-mails including the headers and bodies.
• Reject if over: allows you to set the maximum
message size for incoming e-mail. Your phone will
reject e-mail which are over the specified size.
• Leave a copy of messages the server: the
phone leaves copies of e-mails in the server after
retrieving.
114
Block list: allows you to set up a filter list to
rejects e-mails from the specified addresses or
associated the specified subject.
Email account: allows you to set up e-mail
accounts and select an account to be used.
• Current account: allows you to select one of the
accounts.
• Account setting: allows you to configure up to 5
e-mail accounts using different e-mail servers.
The following options are available for each
account:
Account name: enter a name for the selected
account.
User name: enter the name to be displayed in
your outgoing messages as the sender's name.
Email address: enter your e-mail address.
User ID: enter your e-mail ID.
Password: enter your e-mail password.
SMTP server: enter the IP address or domain
name of the server to be used for receiving
messages. Your e-mail service provider can give
you this information.
SMTP port: enter the SMTP port number. Your e-
mail service provider can give you this
information.
Protocol type: specify an e-mail protocol type for
the incoming server, either POP3 or IMAP4.
Contact your e-mail service provider for more
information.
POP3 port: (For POP3) enter the POP3 port
number.
Messages
115