How To Configure A Point-To-Point Bridge Configuration - NETGEAR DG834N Reference Manual

DG834N RangeMax NEXT Wireless ADSL2+ Modem Router Reference Manual
• Repeater with wireless client association. Sends all traffic to the remote access point. See
"How to Configure a Repeater with Wireless Client
Note: The wireless bridging and repeating feature uses the default security profile to send
and receive traffic.
To view or change these configurations, select Advanced Wireless Settings from the main menu:
Figure 5-9

How to Configure a Point-to-Point Bridge Configuration

In point-to-point bridge mode, the DG834N modem router communicates as an access point with
another bridge-mode wireless station. As a bridge, wireless client associations are disabled—only
wired clients can be connected. You must enter the MAC address of the other bridge-mode
wireless station in the field provided. Use wireless security to protect this communication.
The following figure shows an example of point-to-point bridge mode.
5-14
Association."
v1.0, April 2008
Advanced Configuration