NETGEAR DG834N Reference Manual page 20

Rangemax next wireless adsl2 plus modem router
Hide thumbs Also See for DG834N:
Table of Contents

Advertisement

DG834N RangeMax NEXT Wireless ADSL2+ Modem Router Reference Manual
Table 1-2. Auto-Detected Internet Connection Types (continued)
Connection Type
IP over ATM Classical IP assign-
ment (RFC1577)
Fixed IP (Static) Account Setup
2. To save your settings, click Apply.
3. Click Test to verify your Internet connection. If you have trouble connecting to the Internet,
see
Chapter 6,
"Troubleshooting.
1-6
ISP Information
• Enter the assigned IP address, subnet mask, and the IP address
of your ISP's primary DNS server. If a secondary DNS server
address is available, enter it also.
• DNS servers are required to perform the function of translating
an Internet name such as
address. For a fixed IP address configuration, you must obtain
DNS server addresses from your ISP and enter them manually
here.
1. If required, enter the account name and domain name from
your ISP.
2. Select Use Static IP Address or Use IP Over ATM (IPoA —
RFC1483 Routed) according to the information from your ISP.
If you select IPoA, the router will detect the gateway IP
address, but you still need to provide the router IP address.
3. Enter your assigned IP address, subnet mask, and the IP
address of your ISP's gateway modem router. This information
should have been provided to you by your ISP.
4. Enter the IP address of your ISP's primary DNS server. If a
secondary DNS server address is available, enter it also.
DNS servers are required to perform the function of translating
an Internet name such as
address. For a fixed IP address configuration, you must obtain
DNS server addresses from your ISP and enter them manually
here.
Connecting Your Router to the Internet
v1.0, April 2008
to a numeric IP
www.netgear.com
to a numeric IP
www.netgear.com

Advertisement

Table of Contents
loading

Table of Contents