Network Settings - Axis 2130R PTZ User Manual

Configuration
16
Emergency Actions
In certain circumstances, it may be necessary to reinstate the Factory Default settings for
your AXIS 2130. This is performed in one of two ways:
• By clicking the Factory Default button on the General Settings admin page. This will
reset most of the unit's parameters but will save the IP address, the Subnet mask, the
Default Router and the Mac (Ethernet) address.
• By pressing the Reset Button, located on the underside of the unit. This option will reset
ALL the parameters currently configured in the unit. To reset the unit using the reset
button, please see Reinstating the Factory Default Settings, on page 20.

Network Settings

Click the Network Settings button to display, edit and refine the settings for:
• TCP/IP - used by the camera for transmitting data over the network.
• DNS (Domain Name System) - the network service used by the product for translating
domain names into IP addresses.
• SMTP (E-mail) - this is the protocol for sending e-mail messages between mail servers on the
network.
• Miscellaneous - set the network media and to restrict the bandwidth used by the product.
Configure the Network Settings with reference to the on-line help and the table below:
TCP/IP Parameters
DHCP
BOOTP
IP address
Default Router
Subnet Mask
Host Name
DNS Parameters
Domain Name
Primary DNS
Secondary DNS
SMTP Parameters
Primary Mail Server
Secondary Mail Server
Return Email Address
Description
Enable DHCP to allow centralized assignation of IP addresses. Requires a DHCP server on the network.
Enable the BOOTP protocol for setting the IP address automatically. For further information on using
BOOTP, see Other IP Setup Methods, on page 23. If you intend to use the AXIS IP Installer, BOOTP must be
enabled.
Specifies the unique 32-bit IP address of your unit.
Specifies the network router your video server will use.
If unsure what value to use, contact your system administrator.
If you are using a DNS server on your network (see below), this is usually the same as the assigned DNS
Name.
Description
Enter the name of the domain your AXIS 2130 belongs to.
Defines the IP address of the primary DNS server. This is used for identifying a computer by name instead
of IP address.
The IP address of the secondary DNS server. This will be used if the primary DNS server is unavailable.
Description
Defines the server that provides your mail facilities.
Defines a secondary server that can provide mail facilities in the event of the primary server being
unavailable.
The reply address for e-mails sent by the AXIS 2130; that is, the name that will appear in the 'From' field
of the dispatched email.
AXIS 2130/2130R User's Manual