Philips DS3100 Manual page 24

3
For first-time use, you will be asked to
install DockStudio app on your iPod/
iPhone.
4
Tap [Yes] (yes) to accept the installation
request.
5
Follow the on-screen instructions to
complete the installation.
6
Launch the app after the installation.
7
Play audio on your iPod/iPhone.
» Audio comes out through this docking
speaker.
Tip
•
With the DockStudio app, you can enjoy music, set
clock and alarm, adjust sound settings, and update
firmware if necessary.
Charge the iPod/iPhone
Note
•
If the docking speaker is operated on the batteries, you
cannot charge your iPod/iPhone.
When the docking speaker is connected to
AC power, the docked iPod/iPhone begins to
charge.
Tip
•
For certain iPod models, it may take up to a minute
before the charging indication appears.
Sync iPod/iPhone with PC
Note
•
Make sure that iTunes has been configured properly
in your PC.
1
Insert the iPod/iPhone in the dock.
2
Press to switch to standby mode.
» The LED indicators light off.
3
Connect your docking speaker and PC
with a USB cable.
4
Launch iTunes to synchronize your docking
speaker with PC.
» The docked iPod/iPhone is
synchronized with PC successfully
through the iTunes.
Note
•
Due to different materials and product techniques,
some USB cables may not work with this device.
23