Table of Contents
Advertisement
Switch off timer
If the TV receives a TV signal, but you don't press a
key on the remote control during a 4 hour period, the
TV switches off automatically to save energy. Also, if
the TV does not receive a TV signal or a remote
control command for 10 minutes, the TV switches off
automatically.
If you use the TV as a monitor or use a digital receiver
to watch TV (a Set-Top Box - STB) and you do not
use the remote control of the TV, you should
deactivate this automatic switch off.
To deactivate the Switch Off Timer ...
1 - Press , select Eco settings and
press (right) to enter the menu.
2 - Select Switch off timer and press OK.
3 - Press the arrows (up) or (down) to adjust
the value. The value 0 deactivates the automatic
switch off.
4 - Press (left) repeatedly if necessary, to close
the menu.
For more information on environmentally friendly TV
settings, in Help, press the color
key
Keywords and look up Eco settings.
19.5
General settings
Languages
In Help, press
Keywords and look
up Language settings for more information.
Clock
In Help, press
Keywords and look up Clock
settings for more information.
Sleep timer
For more information, in Help, press the color
key
Keywords and look up Sleep timer.
Switch off timer
For more information, in Help, press the color
key
Keywords and look up Switch off timer.
EasyLink
EasyLink
To switch off EasyLink completely...
1 - Press , select General settings , and
press (right) to enter the menu.
2 - Select EasyLink, press (right) and
select EasyLink one step further.
3 - Select Off.
4 - Press (left) repeatedly if necessary, to close
the menu.
EasyLink remote control
To switch off EasyLink remote control...
1 - Press , select General settings , and
press (right) to enter the menu.
2 - Select EasyLink > Easylink remote control, and
press OK.
3 - Select Off.
4 - Press (left) repeatedly if necessary, to close
the menu.
Pixel Plus Link
Some devices, a DVD or Blu-ray Disc player, might
have their own picture quality processing. To avoid
bad picture quality caused by interference with the
TV processing, the picture processing of these devices
should be disabled. The TV comes with Pixel Plus link
turned on and disables the picture quality processing
of recent Philips devices connected to the TV.
To switch off Pixel Plus link...
1 - Press , select General settings , and
press (right) to enter the menu.
2 - Select EasyLink > Pixel Plus link, and
press OK.
3 - Select Off.
4 - Press (left) repeatedly if necessary, to close
the menu.
Auto turn off devices
You can set the TV to turn off the connecting HDMI-
CEC compliant devices if they are not the active
source. The TV turns the connected device to standby
after 5 minutes of inactivity.
51
Advertisement
Table of Contents
