Table of Contents
Advertisement
18
Multi room
18.1
About Multi room
With Multi Room you can watch a TV program that
comes from another TV in your home. The program is
streamed from one TV to the other. You can stream a
program to a TV that has no antenna connection or
has no Smart card subscription of its own. You can
also stream a recorded program from a TV with a
connected Hard Drive.
The TV that streams the program to the other TV must
be switched on and must tune to the channel or play
the recording.
Streaming a TV program with Multi Room will reduce
the picture resolution to 720p maximum. You cannot
stream radio channels. Some broadcasters protect
their programs to prevent this kind of streaming.
18.2
What you need
To stream a TV program from one TV to another, the
program must come from a digital TV channel.
Both TVs must be connected to your home wireless
network. For more information,
press
Keywords and look up Wireless Network.
Make sure that both TVs have the setting Switch on
with Wi-Fi (WoWLAN) enabled in the TV setup.
To check this setting on this TV...
1 - Press , select Network and press (right) to
enter the menu.
2 - Select Switch on with Wi-Fi (WoWLAN) and
press OK.
3 - Select On and press OK.
4 - Press (left) repeatedly if necessary, to close
the menu.
18.3
Using Multi room
First time use
When you start Multi room for the first time, turn on
both TVs.
Once this TV has connected to the other TV, the other
TV will appear automatically in the Browse
network menu, even when it is in standby.
Stream a TV channel
With Multi Room, you can watch the current TV
channel or open the channel list of the other TV. If
you select a channel from the list, the other TV will
also switch to the channel you selected. If the other
TV has a built-in satellite tuner with installed channels
or a connected Hard Disk Drive (HDD) with
recordings*, you can also watch these on this TV. You
cannot switch channels while the other TV is
recording or in Pause TV mode.
To watch a TV channel from the other TV . . .
1 - Make sure the other TV is switched on.
2 - On this TV, press SOURCES,
select Browse network and press OK.
3 - If the TV is not yet connected to your home
network, the network installation will start
automatically. If the TV is already connected, go to
step 4.
4 - In the Browse network menu, select the name
of the other TV and press OK. If you have several TVs
in your home, you might want to change the name of
the other TV. You can do that on the TV itself.
5 - Select what you want to watch from the other TV
. . .
• To watch the current channel of the other TV,
select Current channel and press OK.
• To open the channel list of the other TV,
select Watch TV and press (Right).
• To open the list of recordings* on the other TV,
select Watch recordings and press (Right).
• You can switch channels with + and -. You
cannot switch channels when the other TV is
recording or in Pause TV mode.
TV network name
If you have more than one TV in your home network,
you can give the TV a unique name.
To change the TV name...
1 - Press , select Network and press (right) to
enter the menu.
2 - Select TV network name and press OK.
3 - Enter the name with the on-screen keyboard.
4 - Select Done to confirm the change.
5 - Press (left) repeatedly if necessary, to close
the menu.
43
Advertisement
Table of Contents
