Remote Control Buttons; And Functions; Tv Buttons And Functions - JVC AV-14AE19D Instructions Manual

Remote control buttons and functions
• Insert two batteries by following
the and polarities and inserting the
• Use AA/R6/UM-3 dry cell batteries.
• If the remote control does not work properly, fit new
batteries. The supplied batteries are for testing, not
regular use.
WARNING:
Batteries shall not be exposed to excessive heat such as direct
sunshine, fire or the like.
Select PICTURE MODE (\ page 6)
RETURN PLUS function
Return to the frequently viewed channel.
Choose the channel you want to programme
Press and hold
To cancel
Press and hold
RETURN function
If you have not set or have canceled the RETURN PLUS channel, this will
return to the previously viewed channel.
Display the programme number or video terminal number.

TV buttons and functions

Headphone jack
Video and audio input jack (EXT-2)
end first.
RETURN PLUS
PROGRAMMED!
RETURN PLUS
CANCELED!
Display the TV's MENU, Exit after finish setting
IN
MENU P -
EXIT
Select Adjust
Channel volume level
Turn the TV on from standby and vice versa
Set OFF TIMER (\ page 8)
Select ECO MODE (\ page 6)
/I
Select programme number
For two digits programme number
AV
Select TV ➝ EXT-1 ➝ EXT-2 ➝ TV
Operating the menus (\ page 6)
Turn the volume Off / On
Adjust the volume level, Turn off Muting
P
Select the desired channel number
POWER/
+
ON TIMER
Remote control TV's main
sensor power on/off
POWER lamp - Indicates the TV's status.
No colour : TV's main power is being turned off.
Red : TV's main power is being turned on.
Blink : While the TV is in standby mode ON
TIMER function is in used. While the
TV is in turn on mode, OFF TIMER
function is in used.
Note: When you turn off the power switch while
TV is in standby mode, the power lamp will
go off in 5 -10 seconds. When you operate
the TV, POWER Lamp will blink.
5