Ringer Tone; Set Date And Time - VTech VCS704 User Manual

Telephone settings

Ringer tone

You can choose from different ringer tones on the base unit.
Press MENU when the base unit is not in use.
1.
until the base unit displays Ringers, and then
2. Press or
press SELECT.
3. Press to highlight Ringer tone, and then press SELECT.
The base unit displays RINGER TONE with the current setting.
4.
to sample each ringer tone (Tone 1 to Tone 10).
Press or
Press SELECT to save your selection. You hear a confirmation tone.
5.
If you turn off the ringer volume, you will not hear ringer tone samples.

Set date and time

The date and time will be displayed on the base unit in idle. Before using the
telephone system, set the date and time as follows. If you subscribe to caller ID
service, the day, month, and time are set automatically with each incoming call.
However, the year must be correct so that the day of the week can be calculated
from the call log information.
Press MENU when the base unit is not in use.
1.
until the base unit displays Set date/time, and then press SELECT.
2. Press or
to select the month, and then press SELECT,
3. Press or
or use the dialing keys to enter a two-digit number (01-12).
to select the date, and then press SELECT,
4. Press or
or use the dialing keys to enter a two-digit number (01-31).
to select the year, and then press SELECT,
5. Press or
or use the dialing keys to enter a two-digit number (00-99), and then
press SELECT.
6. Press or to select the hour, and then press SELECT,
or use the dialing keys to enter a two-digit number (01-12).
to select the minute, and then press SELECT,
7. Press or
or use the dialing keys to enter a two-digit number (00-59).
to select AM or PM.
8. Press or
9. Press SELECT to save the settings. You hear a confirmation tone.
The phone plays two beeps if you enter an invalid number.
14