Mute; Temporarily Silencing The Ringer; 3-Way Conference - VTech VCS704 User Manual

Telephone operation

Mute

The mute function allows you to hear the other party but the other party cannot hear you.
During a call, press MUTE on the base unit or a wireless mic unit. The base unit
•
displays Muted briefly. All microphones in the system are muted until the mute
function is turned off.
Press MUTE on the base unit or a wireless mic unit to unmute all microphones in
•
the system. The base unit displays Microphone ON briefly.

Temporarily silencing the ringer

When the base unit is ringing, you can temporarily silence the ringer of the base unit
without disconnecting the call. The next call rings normally at the preset volume.
To silence the ringer:
• Press MUTE on the base unit. The base unit displays Ringer off
• The phone rings when there is an incoming call unless the ringer volume of the base unit is
turned off.
• You can also press
saved and applied to the next incoming call.

3-way conference

When you subscribe to 3-way conference service from your telephone service
provider, you can establish a 3-way conference if the two called parties remain on
the line.
Press TALK on the base unit.
1.
2. When you hear a dial tone, dial the number of the first call.
3. When the first call is connected, press FLASH to put the current call on hold.
4. When a dialing tone is heard, enter a new outgoing call number.
When the second call is connected, press FLASH. A 3-way conference
5.
is established.
To end the conference:
Press OFF on the base unit.
•
To resume the first call:
Press FLASH on the base unit.
•
or on the base unit to adjust the ringer volume. The adjustment will be
10
.