Acer PREDATOR G7710 SERIES User Manual page 76

64
of the case. This back plate will go where the tabs used to be.
8 Press the release latch to secure the card in place.
9 Locate the second PCI Express power cord from the CrossFire-Ready power
supply and plug it in to the second graphic card.
10 Attach the CrossFire connector to connect the two graphic cards.
The system comes with an CrossFire connector designed to work with that
mainboard.
Note: When you power up the PC, you'll want to ensure that the video
connector (to your monitor) is plugged into the graphic card.
11 Observe the post-installation instructions described on page 49.
When you turn on the system, you will be greeted with a "pop up" bubble
in the lower right hand corner, telling you that you have an CrossFire-
enabled PC.
Note: Illustrations are for reference only. Actual product specifications may
vary.
6 Upgrading your computer