Technical Data; Accessories - Husqvarna 436 Li Operator's Manual

electrical and electronic equipment. This helps to
prevent damage to the environment and to persons.
Speak to local authorities, domestic waste service or
your dealer for more information.

Technical data

Motor
Type
Features
Low energy mode
Lubrication system
Type of oil pump
Oil tank capacity, US Pint/litre
Weight
Chainsaw without battery, guide bar, saw chain and emp-
ty chain oil tank, lb/kg
Saw chain/guide bar
Recommended bar lengths, inch/cm
Usable cutting length, inch/cm
Type of drive sprocket/number of teeth
Maximum chain speed / (savE), m/s
Recommended cutting equipment for
USA
Following is a list of recommended cutting equipment for
Husqvarna 436 Li and 536 LiXP. This model equipped
with either of the listed guide bar and saw chain
combination(s), fulfills the requirements according to UL
60745-1 and UL 60745-2-13.
Chainsaw models Husqvarna436 Li and 536 LiXP met
the kickback performance requirements of UL
60745-2-13 when tested with the combinations of bars
and saw chains listed below. The saw chain Husqvarna
H38 is also classified as a low kickback saw chain since
34
Note The symbol shows on the product or package of
the product.
Technical data
436 Li
BLDC (brushless) 36V
savE
Automatic
0.42/0,2
5.5/2,5
10-14/25-35
9-13/23-33
Spur/6
15 (12)

Accessories

is met the requirements for low kickback saw chain
outlined in UL 60745-2-13. We recommend to use only
the listed combinations of bars and saw chains for
chainsaw models Husqvarna436 Li and 536 LiXP. Other
chainsaw models may not meet the kickback
requirements when equipped with the listed bar and saw
chain combinations.
Guide bar and saw chain combinations
Following is a list of recommended cutting equipment for
Husqvarna436 Li and 536 LiXP. The listed
combination(s) of powerhead, guide bar and saw chain
meet all requirements outlined in Canadian Standards
536 LiXP
BLDC (brushless) 36V
savE
Automatic
0.42/0,2
5.3/2,4
10-14/25-35
9-13/23-33
Spur/6
20 (15)
481 - 001 - 22.01.2018