Table of Contents
Advertisement
ADJUSTING THE TAD'S
VOLUME
To adjust the speaker's volume, repeat-
edly press
.
or
VOL
The volume setting from
(highest) appears in the message
10
counter window.
DELETING MESSAGES
To delete the current message while it is
playing, hold down
TAD beeps.
DELETE
To delete all messages at once, while
messages are not playing, hold down
on the base until the TAD
DELETE
beeps and
0
appears in the message
counter window.
Note: You cannot delete new (not yet
played) messages. If you try to delete all
messages at once while you still have
new messages, the TAD sounds five
quick beeps and does not delete any
messages.
.
on the base.
(lowest) to
1
until the
DELETE
PIN
SETTING THE REMOTE
OPERATION PIN
The TAD-729's two-digit remote opera-
tion PIN (personal identification number)
prevents unauthorized remote access to
your messages. The PIN is preset to 80.
Follow these steps to change the PIN to
any number from 00 to 99.
Note: If you wait more than 2 minutes
between each keypress, the TAD exits
the PIN setting process. Start again at
Step 1.
1. Hold down
until the TAD beeps
PIN
and
appears in the message
00
counter window.
2. Press
to set the first digit of the
SKIP
PIN higher or
REPEAT
Then press
.
PIN
3. Press
or
SKIP
REPEAT
second digit of the PIN, then press
. The TAD announces the new
PIN
PIN.
To check your PIN at any time, press
. The PIN appears in the message
PIN
counter window, and the TAD announc-
es it.
Note: If you press
SPEAKER
while changing the PIN, the TAD
STOP
exits. Begin again with Step 1.
to set it lower.
to set the
or
PLAY/
31
Advertisement
Table of Contents
