Radio Shack ET-917 Owner's Manual page 8

43-1087.fm Page 8 Tuesday, August 17, 1999 2:46 PM
1. Drill two holes 3
inches apart. Then
thread a screw into
each hole, letting the
heads extend about
3
/ inch from the
16
wall.
2. Plug one end of the supplied mod-
ular cord into the
TEL.LINE
the back of the base.
3. Route the modular cord through
the right slots on the bottom of the
base.
8
5
/
16 3
/
16
5
3 /
16
jack on
4. Insert the supplied AC adapter's
barrel plug into the
on the back of the base.
5. Route the adapter's cord through
the slot on top of the base and
through the left slots on the bot-
tom of the base.
6. Align the keyhole slots with the
mounting screws and slide the
base downward to secure it.
7. Plug the modular cord into a mod-
ular phone line jack.
jack
DC IN 9V