Health O Meter 3001KL-AM User Instructions page 8

ASSEMBLY INSTRUCTIONS
4. Tip the platform and handrails back to
an upright position. Fasten the handrail
to the platform using the (8) included
M8x20 bolts (4 bolts per each handrail
support). Use the included 13mm box
wrench to tighten the bolts.
5. Carefully tilt the scale forward to access
the underside of the platform. Plug the
load cell connector cable into the port.
6. Carefully tilt the scale back to an upright
position. Obtain the display head and
align the four holes on the back of the
display head with the four mounting
holes on the display support. Fasten the
display head onto the metal display
support by using the (4) included pan
head M3 screws. Use a Phillips head
screwdriver to tighten the screws.
Load cell connector cable port
8