Common Interface-Cam; Home Theatre System; Blue-Ray Disc Player; Dvd Player - Philips 43PFT4012/05 User Manual

Common Interface-CAM

CI+
COMMON INTERFACE
This TV is ready for the CI+ Conditional Access.
With CI+ you can watch premium HD programmes, like
movies and spor ts live offered by digital TV operator in
your region. These programmes are scrambled by the TV
operator and descrambled with a prepaid CI+ module.
Contact a digital TV operator for more information on
terms and conditions.
CAM
Inser t a CAM module.
Switch off the TV before inser ting a CAM.
Inser t the C AM module properly. Incorrect inser tion can
damage the C AM and TV.
Use the CI Interface slot on the TV to inser t the C AM card.
With the front of the card facing to you, gently inser t the
C AM as deep as it will go.
Leave the card in the slot permanently.
It may take a few minutes before the C AM is activated.
Removing the C AM will deactivate the broadcast ser vice
on the TV.
If a C AM is inser ted and subscription fees have been paid
(connection method can differ), you can watch the TV
broadcast. The inser ted C AM is exclusive for your TV.
STB(Set-Top Box)
Digital Receiver STB
TV
Use a RF signal cable to connect the antenna to the STB(a
digital receiver), then add an HDMI cable to connect the
STB to the TV.
Notice
If you just want to use the remote control of the Set-Top
Box, you can follow below operations to avoid the TV
entering auto standby.
Press MENU key, select the Time, then press OK key and
set the Auto Standby status to off.
SMART CARD
FRONT
CAM

Home Theatre System

Connect with HDMI ARC
HDMI
(ARC)
Use an HDMI cable to connect a Home Theatre System
(HTS) to the TV. You can connect a Philips Soundbar or
HTS with a built-in disc player.
HDMI ARC
HDMI 1 connection on the TV have HDMI ARC (Audio
Return Channel). If the device, typically a Home Theatre
System (HTS), also has the HDMI ARC connection,
connect it to HDMI 1 on this TV. With the HDMI ARC
connection, you do not need to connect the extra audio
cable that sends the sound of the TV to the HTS. The HDMI
ARC connection combines both signals.
Audio to video synchronisation (sync)
If the sound does not match the video on the screen, you
can set a delay on most Home Theatre System with a disc
player to match the sound with video.
Connect with HDMI
Use an HDMI cable to connect a Home Theatre System
(HTS) to the TV. You can connect a Philips Soundbar or an
HTS with a built-in disc player.
If the Home Theatre System has no HDMI ARC connection,
add an optical audio cable (Toslink) to send the sound of
the TV to the Home Theatre System.
Blu-ray Disc player
Use a High speed HDMI cable to connect the Blu-ray Disc
player to the TV.
If the Blu-ray Disc player has EasyLink HDMI CEC, you can
operate the player with the TV remote control.

DVD player

Use an HDMI cable to connect the DVD player to the TV.
If the DVD player has EasyLink HDMI CEC, you can
operate the player with the TV remote control.
6
Home Theatre