Table of Contents
Advertisement
43-1126.fm Page 20 Thursday, April 27, 2000 11:23 AM
Then, repeatedly press
through the Caller ID records from the new-
est to the oldest, or
VOL/CID
through the records. To scroll quickly through
the records, hold down
VOL/CID
When you scroll past the last record, total
record number appears, then the first record.
When you scroll past the first record, the total
record number appears, then the last record.
Caller ID Messages
Display
Shows the number of new Caller ID records (records you have not
New:XX
reviewed) and the total number of records.
Total:XX
Private Name
The caller has blocked the Caller ID information.
or
Private Number
Unknown Name
The caller is not within a Caller ID service area.
or
Unknown Number
Incomplete
Appears if there was an error during the transmission of Caller ID infor-
Data
mation. Occasional errors are normal. If the phone frequently displays
Incomplete Data, contact your local telephone company or RadioShack
store.
Adding/Deleting the Area Code
When the area code of the received call is
the same as the one you stored (see"Storing
Your Area Code" on Page 13), the caller ID
record does not show the area code. If it is
different, the record shows the area code.
However, you can add or delete the area
code on the display. When the record is on
the display, press
to add or delete the area
3
code. Pressing
again deletes or adds the
3
area code.
When you dial the number or store it into
memory, the phone dials or stores the num-
ber as it appears on the display.
20
9 to scroll
VOL/CID
8 to scroll back
8 or 9.
Operation
The top line of each record shows the date,
time and the number of calls from that num-
ber. The second line shows the caller's
name, and the third line shows the caller's
phone number.
To exit the Caller ID record display, press
.
CALL ID
Description
Dialing Numbers from a Caller ID
Record
To dial a local number stored in a Caller ID
record, recall the record, then press
it is a long distance call, press
before the displayed number) before you
press
. If you want to add or delete the
TALK
area code, press
before you press
3
Note: If a Caller ID record does not contain a
phone number (if it was blocked by the caller,
for example) you cannot dial from that
record.
. If
TALK
(
1
appears
1
.
TALK
Advertisement
Table of Contents
